0 Item(s)
View shopping cart
No item
07
Nov
You have seen Cornhole on a video or on YouTube, or perhaps played it in the neighbors' garden. And now you would like a set yourself. But what should you choose? There are now quite a few providers and everything is quite similar. However, that is not always the case! We try to help you with a few useful tips.
(ACL Rec - Recreational set)
(ACL Rec - Recreational set)
Tip 1: Look carefully at the thickness of the board and the frame
Firstly, it is important to look carefully at the thickness of the board. Boards are already offered with just a few millimeters thickness. The thinner the board, the more the pockets will go and the board will bounce. Ideally, you want the thickest possible top layer. Of course it is true: the thicker, the more expensive. Our tip: Always go for a board that is at least 10mm thick, we strongly advise against anything less.
Firstly, it is important to look carefully at the thickness of the board. Boards are already offered with just a few millimeters thickness. The thinner the board, the more the pockets will go and the board will bounce. Ideally, you want the thickest possible top layer. Of course it is true: the thicker, the more expensive. Our tip: Always go for a board that is at least 10mm thick, we strongly advise against anything less.
The thicknesses of Wicked Wood are as follows:
- Recreational boards: 10mm
- Competition boards: 15mm
- Professional boards: 18mm
Tip 2: Always check whether you have the correct dimensions
The official dimensions of the ACL, the largest organization in the sport, can easily be found here . Boards need approximately 120cm x 60cm for the competition version. 90x60cm boards are also offered, also by Wicked Wood, these are easier to carry but do not meet the competition conditions.
If you want to play real matches, always go for the 120x60cm version. But also check carefully whether the back of the board, when unfolded, is at the correct height.
If you want to play real matches, always go for the 120x60cm version. But also check carefully whether the back of the board, when unfolded, is at the correct height.
Tip 3: Investigate whether the correct material is being used
The best material for Cornhole boards is birch wood. And preferably Baltic birch wood. This ensures the most stable boards. Professional Cornhole sets are always made of this type of wood.
So don't go for a set made of aluminum or plastic. But also check carefully whether a cheaper type of wood has been used. This will ensure that the set plays less well and will not last as long.
Tip 4: Think about which set suits you
At Wicked Wood we offer three different standards:
ACL Rec - Recreational sets, for the recreational player
ACL Comp - Competition sets for players who really want to play according to all official standards
ACL Pro - Professional sets, just as you know them from TV. All professionals play on this
ACL Rec - Recreational sets, for the recreational player
ACL Comp - Competition sets for players who really want to play according to all official standards
ACL Pro - Professional sets, just as you know them from TV. All professionals play on this
The difference is in the thickness of the wood, the finish of the wood and the varnish layer. Below is a summary of the differences:
ACL Rec - 10mm thick, straight finished corners, 2 layers of varnish
ACL Comp - 15mm thick, rounded corners, 3 layers of varnish
ACL Pro - 18mm thick, rounded corners, 8 layers of varnish
ACL Comp - 15mm thick, rounded corners, 3 layers of varnish
ACL Pro - 18mm thick, rounded corners, 8 layers of varnish
So think carefully about what you want as a player and which set suits you best.
Not sure? Send us a message and we will be happy to think along with you!
Ton de Vries
Hi Cornholefreunde
Ich heisse Claus Schmieder und spiele aktiv beim TopCorn Rust Cornhole. Da war ich auch schon öfters ganz oben auf dem Treppchen mit unserem Team bei deutschen Meisterschaften.
Da ich jetzt aber nicht mehr dem DeCoV Vorstand angehöre und sich die Cornholegemeinde etwas spaltet, suche ich nach guten 1,20er Turnierbretter mit Folie.
Da hätte ich gerne zwei Bretter mit einem Druck nach Vorbild einer regionalen Brauerei ( www.hieronymus.beer )
Hintergrund in einer Bretteroptik, mittig groß das Brauereilogo bunt dazu auch ein Schriftzug.
Können ihr mir da mal ein Angebot machen?
Ich will diese Brauerei dann als Sponsor gewinnen für anstehende Turniere in Rust und als Werbebretter für unsere Vereins- und Jedermannsturniere.
Gruß Claus